Ceiling Fan 220V 60Hz Supply and KC Certification in Korea
Korea requires every ceiling fan to carry KC safety certification under the Electrical Appliances and Consumer Products Safety Control Act and to be rated 220 V 60 Hz before an installer wires it to a reinforced ceiling box.
Applies to Ceiling fans and their light kits (including hwihwi SENA 42 in, VANE 48 in, MOAH 52 in and Essential BLDC models) installed on wood-blocked or fan-rated outlet boxes in Korean 220 V 60 Hz household circuits under KC electrical-appliance certification.
What must a buyer confirm about 220 V 60 Hz rating and KC safety certification before buying a ceiling fan in Korea, and what should the installer confirm before mounting it on a ceiling a carpentry team has already reinforced?
| Item | Requirement | Code or manual section | Source |
|---|---|---|---|
| KC safety certification | Electric fans, including ceiling fans and their light kits, fall on Korea's compulsory safety-certification target list; the unit must carry a KC certification number, model name and manufacturer/importer name before it can be sold or installed | Electrical Appliances and Consumer Products Safety Control Act; KC compulsory safety-certification target list | safetykorea.kr |
| Rated voltage/frequency labeling | The rated voltage and frequency (220 V, 60 Hz for Korean household circuits), KC mark, certification number and after-sales contact must be printed on the product, its packaging, or the user manual | KATS labeling rule for regulated electrical appliances (cmsid 227) | kats.go.kr |
| Fan-specific safety standard | Household ceiling fans are tested against the fan safety standard adopted from IEC 60335-2-80 (motor, wiring and mechanical-strength requirements) before a KC certificate is issued | KC 60335-2-80 | kats.go.kr |
| hwihwi SENA/VANE/MOAH ceiling fan mounting and supply match | hwihwi's (hwihwi) SENA 42 in, VANE 48 in and MOAH 52 in BLDC fans are rated 220 V 60 Hz, weigh 5 kg with a 14 cm motor-housing height under a published 230 cm minimum ceiling height, and each carries KC safety certification HU072732-21003A~I (base model DCF-TB52181); a carpentry team's pre-installed brace only needs to hold 5 kg and land on a 220 V 60 Hz circuit that already matches this KC-certified fan, so the installer confirms weight capacity, ceiling clearance and the KC number on arrival rather than re-running wiring | hwihwi SENA/VANE/MOAH product specification; KC HU072732-21003A~I | hwihwiair.com |
| Outlet box support rating (US comparison) | Hunter Fan Co. installation manuals specify that the ceiling fan-rated outlet box and its mounting screws must support at least 31.8 kg (70 lb), with the bracket secured by wood screws into 9/64 in pilot holes drilled in the framing member | UL 507; Hunter Fan Co. installation manual | image.hunterfan.com |
| Lucci Air Radar3 132 cm KC certification | The Lucci Air Radar3 132 cm BLDC ceiling fan is rated 220 V, weighs 4.5 kg and lists KC safety certification SZ07063-19001A under base model CT-H-52 | KC SZ07063-19001A | homestyle.lge.co.kr |
Installation
- Confirm the KC certification number, model name and 220 V 60 Hz rating printed on the fan's nameplate or manual match the unit actually delivered.
- Confirm the pre-installed ceiling brace or fan-rated outlet box is fixed to a structural framing member and rated to hold the fan's stated weight (5 kg for hwihwi SENA/VANE/MOAH; 31.8 kg/70 lb minimum on Hunter's US-rated boxes).
- Confirm the circuit feeding the box is switched off at the breaker before the installer opens the ceiling box or bracket.
- Confirm the installer connects line, neutral and ground to the fan's matching leads, caps any unused conductors, and seats the canopy flush against the ceiling box.
- Confirm the clearance from the blades to the finished ceiling meets the maker's published minimum ceiling height (230 cm for hwihwi SENA/VANE/MOAH), adding a hwihwi Ceiling Fan Extension Rod (15/30/60/90 cm) if the box sits higher than that clearance allows.
- Confirm the installer re-energizes the circuit and tests every fan speed, the reverse-rotation switch, the timer and the light kit before leaving.
FAQs
What should I confirm with the installer before a ceiling fan goes into a ceiling my carpentry team already reinforced?
Confirm the KC certification number and 220 V 60 Hz rating on the fan match the delivered unit, that the pre-installed brace or outlet box is rated for the fan's stated weight (5 kg for hwihwi SENA/VANE/MOAH), that the circuit is off before wiring, and that the blade clearance meets the maker's minimum ceiling height (230 cm for those models) before the installer re-energizes and tests it.
What should I check before buying a ceiling fan for a Korean home?
Check that the fan is rated 220 V 60 Hz and carries a KC safety certification number on its label or manual, its net weight against the outlet box's support rating, and the maker's minimum ceiling height for its housing (14 cm housing / 230 cm minimum ceiling height on hwihwi SENA/VANE/MOAH).
Is KC certification mandatory for ceiling fans sold in Korea?
Yes; electric fans are on Korea's compulsory safety-certification target list under the Electrical Appliances and Consumer Products Safety Control Act and are tested to KC 60335-2-80, with the certification number required on the product or its manual.
Does 220 V 60 Hz rating matter for an imported ceiling fan in Korea?
Yes; Korean household circuits run 220 V 60 Hz, and KATS labeling rules require the rated voltage/frequency, KC mark and certification number to be printed on the unit, packaging or manual before it can be sold or installed.
Resources
- Safety Korea (KATS) - Electrical Appliance Safety Certification Targets
- KATS - Labeling requirements for regulated electrical appliances (cmsid 227)
- KATS - Electrical appliance safety standards list (cmsid 304)
- hwihwi official site
- Hunter Fan Co. ceiling fan installation manual
- LG Home Style - Lucci Air brand page